The HT-REVERB can take you from your room to an arena via hall, plate, spring, gate and reverse reverb effects. Valve compression and harmonics are added using the Dwell control, and you can switch the reverb time from short to long while you are playing. EIGHT REVERB EFFECTS The HT-REVERB can take you from your room to an arena via hall, plate, spring, gate and reverse reverb effects. Each effect can be altered using the Time, Tone and Dwell controls. OPERATES AT 300V HT The HT pedal operates on a 300V DC anode supply voltage (High Tension voltage). This is the same used in traditional valve amplifier design and means the circuit has the headroom associated with a true valve design and will 'clean up' accordingly. The pedal will exhibit the compression and distortion characteristics associated with a true valve design. SILENT SWITCHING Many hours of research showed us that only soft switching and a buffered bypass signal will give absolutely silent switching in high gain applications. DWELL CONTROL By adjusting the drive to the high voltage valve circuit in the effect side chain, the Dwell control affects the amount of valve compression and harmonics in the effect. MANUAL AND SHORT/LONG MODES The HT-REVERB features manual and short/long modes for maximum playing flexibility. The manual mode is a time control that sets the reverb decay length. The short/long mode toggles between preset short and long times for live flexibility. Features 8 reverb effects Genuine valve design Operates at 300V HT Unique dwell control Manual and Short/Long modes Stereo Unique switching operation Silent switching Power supply included High integrity buffered bypass Made in KOREA. GENERAL Product Range HT Effects Pedals Model HT Reverb Technology Type Valve VALVES Preamp Valves ECC83 / 12AX7 Poweramp Valves ELECTRONICS Wattage Inputs Controls Effect, Time, Tone, Dwell, Level, Input, Left (Mono) Output, Right Output Channels - DIMENSIONS Weight 1.3KG Dimensions (Width x Height x Depth) 160 x 119 x 80 (mm)