These fittings are used for solvent cement jointing to PVC pressure pipes. Color: Grey Material: PVC PVC pressure piping system is suitable for cold water service such as water reticulation and irrigation system. Tank connectors are used to connect a PVC pipe to a liquid storage tank. The fitting has one threaded end with two back nuts to facilitate connection to the wall of a tank, with one plain end to connect to a fitting or valve of the same diameter. Ensure you use our PVC solvent cement and cleaner on the plain side of the fitting in order to bond the pipe and fitting together. We recommend the use of thread sealing tape to secure the connection of the threaded end of the fitting; these are available in our accessories range. Size: 1/2" (15 mm) 3/4" (20 mm) IMPORTANT NOTE: - THE SIZE SHOWN IN OUR SITE IS NOMINAL SIZE . IT IS NOT THE SAME AS ACTUAL INTERNAL DIAMETER. NOTIS PENTING: - SIZE YANG TUNJUK ADALAH "NOMINAL SIZE". INI BERBEZA DENGAN UKURAN DIAMETER. NOMINAL SIZE & ACTUAL INTERNAL DIAMETER (UKURAN DIAMETER) MEASUREMENT LIST: -1/2" (15 MM) = 21.0 MM -22.0 MM - 3/4" (20 MM) = 26.5 MM - 27.0 MM - 1" (25 MM) = 33.30 MM - 33.8 MM - 1-1/4" (32 MM) = 42.0 MM - 42.5 MM - 1-1/2" (40 MM) = 48.0 MM - 48.5 MM - 2" (50 MM) = 60.0 MM - 60.6 MM - 3" (80 MM) = 88.7 MM - 89.1 MM - 4" (100 MM) = 114.1 MM - 114.5 MM - 6" (155 MM) = 168.0 MM - 168.5 MM QUANTITY - 1PCS Tips when use: 1. The 1 slip-style ends require solvent welding for a secure fit. 2. This fitting is manufactured from type 1 grade 1 PVC for optimum performance. 3. Withstands up to 358 PSI working pressure 4. Do not test or use with compressed air or gas, or compressed air or gas systems Buatan Malaysia