If your leather is a high quality leather and its cracking or peeling off, Our product for handmade DIY Leather rejuvenation will help fix to perfection with Love by applying a high quality leather restorer cracked Leather filler and Its Dye Paste. STEPS TO FOLLOW USING THESE LEATHER RESTORER KIT. So to start, we have to clean up the Leather to remove all dirts, Stains, Grease etc. We going to use the Industrial heavy Duty Leather cleaner to get off all the dirts and brighten up the leather surface. Make sure you have a piece of Cloth to clean, spray the Leather Cleaner Solution onto the surface area that you want to work on. let it sit in a minute so that it can deeply soak and loosen up the dirts , Dried Sweats. Then begin to wipe the leather with the piece of wet cloth until its all wiped Clean and dried. Next Step, is to Sand the rough areas on the leather a bit to smoothen the surface area, just Sand it down to be nice and smooth.No aggressive pressure just light sanding will do. After that, get your Leather cleaning piece of Cloth or a Tack Cloth and wipe out the dust fragments or Cracked leather residues. Open the Leather Repair Filler, use a Spatula to apply it onto the Leather areas, just wipe the filler into the Cracked leather spots and wipe it off again, your objective here is to get the filler stuck deep into the Cracks. repeat again more times until its all filled and looks smooth.Leave it to dry and after its dried, checked for missed spots, if you find any missed spot, re-apply again by repeating the filling process. Keep spreading the filler into all cracks repeatedly until the cracks are smoothly covered. Don't rush, just smooth and easy. Our products are easy to apply and easy to work with. After that, leave it to dry for 6-10 Hours, or you can allow it to cure overnight. if you notice any wear or cracks, redo the filling, The leather filler gives the Leather a foundation to apply the leather dye Paste. Make sure its completely dried and no trapped moisture in it. Before applying a leather dye paste, remember to sandpaper once more until smooth and nice feels. And also use the leather cleaning cloth to wipe down any dusty surfaces, so that there is nothing left on the leather to interfere with the work. Get the CRACKED LEATHER DYE PASTE. Firstly, apply some quantity onto a soft sponge and rub it on the Leather sofa or upholstery sparingly, on a thin coat layer. We just want the dye to soak into the filler. Then immediately apply the second coating, this coat layer must be applied thicker than the first. Each Time, any coat you put on the leather would be richer and richer. After that allow to dry. Sandpaper and then Apply the third coat layer, this time thicker than previous. Alow to dry overnight or use a hair dryer to blow it hot for fast drying. Note: Using a soft sponge is preferable than using a brush, I discovered that sometimes the brush may leave a stroke lines which will need too much Sanding.