Description Classic-A Boiled Linseed Oil is a traditional wood treatment used to restore the natural sheen in aged / tired wood. Classic-A Linseed oil creates a finish that is generally impervious to water, heat, scratches and most stains. Ready to use / Oil Based / Do not dilute. Uses : Suitable for interior or exterior use / Gives wood a natural finish. /Works on most types of unpolished timbers. Preparation : Ensure surfaces are clean, sound, dry and free from polish or paint. Application : Apply liberally with a cloth or brush until wood is saturated. Remove excess with a cloth after saturation. Application tools : Stain pad, stain applicator, cotton rag, paintbrush. Number of coats : 2- 3 coats Drying time : - First coat : 12 hours / Other coats : 24 hours - Utilization : 2 days / First damp cleaning : 14 days Coverage: 8 to 10 m²/ L Tools Cleaning: Clean brushes with white spirit or mineral turpentine. Limitation : Exception of oak where darkening could occur. It is user responsibility to determine suitability for use. If in doubt, please contact technical services for advice. Safety & Precaution : Flammable : No smoking ! Keep away from fire or open flame when use. Ingestion : Non consumable, for external use only. Skin contact : Wash immediately with plenty of soup and water. Eye contact : Immediately flush with water, remove contact lens, continue flushing with water for atleast 15 minutes, then get medical attention. Keep out of reach of children. NOTE : This item DOES NOT ship to Sabah & Sarawak due to prohibited ship by air freight.