Feature :
Minimum Effort. Maximum Efficiency
Easy to control - tools stops immediately after deactivation via electronic brake
Dual-activation mode – Simply push tool or press button to begin
Precise or Power – Mechanical clutch with 5 torque settings and maximum performance mode
Mechanical Clutch – Precise with 5 torque setting and maximum performance mode
Electronic Brake – easy to control as the tools stops immediately after deactivations
Ergonomic – easy to grip when working in multiple positions
¼” HEX Bit Holder – highly flexible, fits to all possible bits
Strong spindle – Shift between manual and power mode
Speed: 360RPM – deliver fast and smooth operation while still maintaining the same powerful performance
Comes with a 6 months warranty
Specifications :
Voltage : 3.6
Battery (Ah) : 1.5
Torque (Nm – Hard/Soft/Min) : 5/2.5/0.2
Speed (RPM) : 360
Electronic Brake : Yes
Smart Stop : Yes
Activation Mode : Push Start & Press Button
Mechanical Clutch Settings : 5 + Maximum Performance Mode
Charging Port : Micro USB
Tool Holder : ¼” Inter HEX
FAQ :
1)How to start the tool?
- Select the direction from F/R switch and push the tool OR Press the button
2)Can this tool use as a manual screw driver?
- Yes, put the F/R switch to neutral position, then the tool can be used as manual screw driver
3)How much screws can be done per charge?
- Approx. 196pcs 3.5x35mm screwing into softwood,
- Approx. 200pcs 3x60mm machines screw into plastic.
4)Where is the charger for the tool?
- All SKU doesn't come with a charger. However you can use your phone USB adaptor to charge the tool with supplied micro-USB cable
5)When should I charge the tool?
- When the battery capacity is below 33%, the charge indicator LED will start to blink during activation. This indicate the tool should be charge.
6)How to know when the tool is fully charge?
- During charging process, the charge indicator LED will blinking continuously. After full charge, the LED will stop blinking and stay ON.
7)What's the charging time?
- 90min for 100%. 60min for 80%
8)Can I use the tool while charging?
- No, the tool won't work once start charging.
9)How is the performance of the tools?
- It is same powerful as previous generation, however is more precise with mechanical clutch now
10)How to select the right torque?
-The torque setting has 5 levels, which shows from small screw to big screw. The tool will start clutching once reach the desired torque. Turn to Max mode for full power.
Note: When set to Max mode, tool won't stop. it will stop only if reach the maximum torque of the tool.
Set Contents :
1 x Go 2 Solo Smart Screwdriver
1 x Plastic Box
1 x Micro USB Cable
2 x 50mm(L) power bit(PH1 & PH2)
1 x Instruction Manual
BOSCH 25pcs Mini X-Line Screwdriver Bit Set - 2607017400
USP:
1) 24 screwdriver bits for the 5 important screw types, in all standard sizes, 25cm and 50cm long, for all fixing job in home and garage
2) Magnetic universal holder for fast bit changes and a reliable screw hold in the bit
3) Everything close to hand. Practical plastic case with a logical arrangement of the included accessories.
4) Suitable for all common power tools brand and manual screwdrivers
Set Contents :
- 16 screwdriver bits L = 25 mm, PH 1/2/3, PZ 1/2/3, SL 4.5/5.5/8.0, HEX 4/5/6, T 15/20/25/30
- 8 screwdriver bits L = 50 mm, PH 1/2/3, SL 4.5/5.5, T 15/20/25
- Magnetic Universal holder
Package Includes:
- 1 x BOSCH GO 2 SOLO Smart Screwdriver - 06019H21L1
- 1 x BOSCH 25pcs Mini X-Line Screwdriver Bit Set - 2607017400