Getah penebat letrik GSE/Karpet Isolator Letrik GSE Karpet ini digunakan untuk menutupi sekitar tempat peralatan tegangan letrik sebagai pencegah pekerja dari serangan letrik yang umumnya disebabkan oleh kebocoran arus letrik semasa melakukan pemeriksaan, pengoperasian, pengukuran ataupun pemasangan pada jaringan letrik yang sedang berfungsi. The RoHS2 Directive restricts the use of lead and other substances, including Cadmium, Mercury Chromium VI, PBBs and, PBDE & phthalates (plasticizers) A) Product Name Model: GS-SLG Corrugated Switchboard Matting / Non-Conductive Switchboard Mat / Dielectric / High Voltage Insulation Rubber Mat B) Raw Material Natural Rubber based polymer C) Purpose Switchboard matting is a non-conductive high-density rubber compound engineered to prevent electric shock around high-voltage equipment. The non-conductive rubber compound creates an insulating barrier between the electrical source and the ground. D) Scope Our GS-SLG is tested according to IEC61111:2009 Clause 5.6.4.3 under IEC 61111:2009 Class 4, Ideal for Dielectric Voltage / Withstand Voltage: 50,000 VAC and Recommended Maximum use Voltage: 36,000 VAC E) Characteristics 1) Brand Name: GSE™ 2) Model: GS-SLG Switchboard Matting / High Voltage Insulation Rubber Mat 3) Top Surface - Anti Slip Corrugated, with an anti-slip corrugated surface to provide a safe working environment, the pattern surface “grabs” the bottom of footwear, improving traction and safety. 4) Colour: Grey 5) Test Certificate IEC61111:2009 Withstand Voltage 5.6.4.3: Tested by 3rd Party Accredited Laboratory (TNB Labs) 6) Test Certificate ASTM D635: 2018 - Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position: Tested by 3rd Party Accredited Laboratory (SIRIM) 7) Test Certificate RoHS Directive Commission Directive (EU) 2015/863: Tested by 3rd Party Accredited Laboratory (SGS) RoHS 1 & 2 8) Product Compliance Status: - A) BS EN 61111 Clause 5.6.4.3 Class 4, Voltage Withstand Test B) Comply with EU RoHS 1 & 2 Standards (RoHS 2011/65/EU) SPECIFICATIONS: 1) Nominal Thickness: 6mm A) Brand: GSE™, Model: GS-SLG, Switchboard Matting, (GREY colour) , 6mm Tk x 1,000mm ( 1m ) Width x 6,000mm ( 6 m ) Length / roll (Approximately ~ 55kgs / pc